The REK-B offers all advantages of the high technical level of the OMEGA III series, particularly regarding precision and reliability. The machine may be integrated in an automatic production line and controlled via a higher-ranking control system (PLC).

Options:

• Hydraulic oil brake
• Working table
• Housing
• Light curtain
• Rotary table
• Control of external periphery

Advantages:

• Easy programming via touch panel TP 270
• Display of time-travel curve and pressure-time curve after the welding cycle on a graphic display with plain text.
• Regulation of the welding forces via proportional valve technology.
• Storage of 99 welding programs; all parameters can be called upon immediately.

Type REK-B

The machine REK-B offers many possibilities for analysis, control and regulation.

• Three welding models in order to meet the requirements of each application
• Positioning of the spin head prior to and after the welding process
• Display of the ongoing process parameters (welding time, welding travel)
• Documentation of the ongoing process parameters via printer (interface RS 232)

(dimensions in mm)

• Stroke: 160 mm
• Height adjustability: 300 mm
• Weight: 225 kg
• Servo-motor drive (max. torque of 14,5 Nm up to 21,0 Nm)
• R.p.m. range from 0 to 3000 1/min
• Maximum weld power 1850 N
• Positioning with angular accuracy of +/-0,5°
• Welding time up to max. 99 sec
• Cooling time up to max. 99 sec
• Optical travel control system, resolution 0,02 mm
• Power control (8 power steps) via proportional valve technology
• Variable acceleration and braking characteristics
• Precise adjustment of the welding tool
• Maximum diameters of the parts to be welded up to 100 mm in semi-crystalline and amorphous plastics
• Two-hand safety sensor
• Emergency-off
• Rotary driver max 1.5 kg
• Interface

Welding modes

Start of rotation

• Prior to contact with the part to be welded
• At contact with the part to be welded
• After contact with the part to be welded

Stop of rotation

• Constant time
• Constant parts time
• Constant travel

Control

• Input of the process parameters via touch panel TP 270
• Display of actual process parameters via touch panel (welding time, welding travel, welding height)
• Display of the travel- time curve and the pressure-time curve after the welding cycle, on a graphic display with plain text.
• The welding forces are regulated via proportional valve technology.
• Three welding modes in order to meet the requirements of each application.
• Documentation of the actual process parameters via printer (RS232)

Technical data

• Electrical connection: 3 x 400 V + earth
• Compressed air connection: 6 bar clean/ dry air