The new Benchtop series from KLN Ultraschall AG are compact tabletop cleaning devices for industrial use. A lid with handle is part of the standard equipment.

The oscillating tanks are equipped with a frequency of 45kHz. The ultrasound can be switched to continuous operation or time limited on the front panel. The ultrasonic generators are integrated in the stainless steel housings. For an optimal cleaning the ultrasonic power can be regulated in 9 steps to protect sensitive components.
The units have a heater with thermostatic control installed on the outside of the tank. The adjustment is made from the front side.

Only aqueous cleaning media may be used in the oscillating tanks.

Ultrasonic oscillating tanks of the SW 60 series are floor-standing cleaning devices in addition to our table-top units, also intended for industrial use. A lid with handle is available as an accessory.

Ultrasonic oscillating tank for residual dirt determination.
We also offer the SW 60 as a standard version for residual dirt determination.

Ultrasonic vibratory troughs for use with solvents
We offer various oscillating tanks for use with solvents. Please contact us for more information.

Product carrier

Technical description:

• solid frame made of round stock
• wire mesh panelling
• mesh size 10 mm
• basket feet made of plastics
• height 20 mm
• max. load 10 kg
• material stainless steel

We offer special product carriers for your special applications.

Rotating basket

Technical description:

• dimensions of basket Ø 150 x 200 mm
• volume max. 7,5 l
• dimensions approx. L 150 x W 240 x H 550 mm
• continuous current drive motor, mounted in the handle
• rotation speed approx. 10 r/min
• rectifier (approx. 150x150x130 mm)
• connection cable to drive motor, length approx. 2,5 m
• drive via encased chain
• basket made of perforated sheet 8 x 8 mm, incl. 3 stumbling rails
• frontal cover with clamping device
• solid frame with 4 plastic feet
• material stainless steel

Lift unit

For the tanks of the SW 60 and SW 90 series we also offer a lift unit.

The product to be cleaned is loaded automatically into the tank, agitated and after a pre-set or individually set period of time it is lifted again.

Agitation

Optionally a mechanical tilting mechanism for agitation of the product in the tank can be adapted. By vertical oscillation a relative movement between product and cleaning agent can be generated. This improves the removal of contamination from the product surface and optimizes the cleaning result. On the other hand the unavoidable irregularities of the ultrasonic field are settled and the cleaning result is improved.

Pump filter aggregate and gravity separator

Pump filter aggregates remove dirt and dust particles from aqueous solutions or rinsing waters. They are used in all cleaning processes which require a high quality of media with long lifetime.

Gravity separators use the physical properties of the different density of liquids for the separation of floating and dropping particles in cleaning baths.

The contamination is detached separately, that means outside the cleaning chamber. Here the separator becomes active during an agitation triggered off by a circulation pump.

The contamination is discharged in concentrated form as waste oil or sediment slurry.